<p id="rp99v"></p>

<form id="rp99v"></form>

<noframes id="rp99v"><span id="rp99v"><th id="rp99v"></th></span>

<noframes id="rp99v"><address id="rp99v"><nobr id="rp99v"></nobr></address>

<noframes id="rp99v">
<form id="rp99v"></form>

    <em id="rp99v"><span id="rp99v"><span id="rp99v"></span></span></em>
    您好,歡迎來到江蘇江達機械制造有限公司官網!
    全國免費服務熱線:0512-63320888
    斗式提升機、刮板輸送機、螺旋輸送機、單托輥帶式輸送機、多點卸料帶式輸送機、氣墊帶式輸送機、橋式堆包機及裝車機等系列化產品

    Reference to foreign counterparts advanced technology and combined with our years of production experience and development of prototype conveyor equipment. This series of equipment has fewer points of failure, good sealing effect, long service life, large conveying output, stable and reliable operation, can be more unloading, unloading material clean and so on; equipment throughout the sealing, especially applicable to transport environment requirements of a higher logistics venues, and transmission components all external, easy to overhaul and maintenance, the specific characteristics are as follows:


    bb6.jpg

    1. the first round of special non-toxic rubber, into the reverse thread drum
    shape, and after static balance and dynamic balance check, the outlet is
    equipped with a special "plow" type material cleaning device to ensure that
    the conveying material can all be unloaded into the head funnel, the end of
    the return tape is equipped with a "V"-shaped sweeper, in order to clean
    the conveyor belt without paragraph of the material;

    2. the bearing layer adopts dumbbell-type ask roller structure, transmission
    parts external, so as to repair; The return layer adopts the design principle
    of idler roller, and the upper and lower conveying belt is isolated from
    the outside and the dust-proof effect is good;

    3. the tail using a sealed type of automatic return device, to fundamentally
    solve the problem of tail accumulation, in order to achieve the entire
    equipment dust-laden effect;

    4. feed mouth with the adjustable buffer baffle, so that the material drop to
    the conveyor belt on the accumulation, and reduce the impact of material on
    the tape, on both sides of the feeding trough with rubber stalls to prevent
    material leakage;

    5. the floor and the side plate and the conveyor belt are equipped with
    ultra-high polymer antistatic, wear-resisting liner, effectively prolong the
    service life of the equipment;

    6. the head and tail of the conveyor are provided with a special built-in
    type (conveyor belt) elastic anti-deflection device;

    7. according to the equipment length and the use condition, may use the unique airtight telescopic type screw tensioning mode,
    the fixed track type Gravity tensioning way and the slide trolley tensioning method, and has the tensioning limit device;

    8. equipped with a repair port, observation window, dust suction tuyere, equipped with speed, deviation, plugging and axial temperature
    detection and other safety devices;

    9. widely used in ports, terminals, silos, such as large tonnage, super long distance of the horizontal or dip less than 15 ° of various
    particles, flake and powdery materials conveying. Can be used alone, can also be multiple units or with other transport equipment;

    10. Multi-point discharging device uses motor to control the lifting of unloading platform and the rotation of unloading plough, and adopts
    high precision limit switch to control the lifting height of unloading platform and the rotation angle of unloading plough, unloading work is
    rapidly changing, unloading platform and unloading plow are covered with high polymer material to improve the service life of Belt and
    equipment; division between unloading plough and unloading platform can be adjusted in the process of equipment operation;



    亚洲中文字幕无码日韩
    <p id="rp99v"></p>

    <form id="rp99v"></form>

    <noframes id="rp99v"><span id="rp99v"><th id="rp99v"></th></span>

    <noframes id="rp99v"><address id="rp99v"><nobr id="rp99v"></nobr></address>

    <noframes id="rp99v">
    <form id="rp99v"></form>

      <em id="rp99v"><span id="rp99v"><span id="rp99v"></span></span></em>